Receive updates via email:

 Updates via RSS

Tag Cloud

Blog Archive

Saturday, March 24, 2007

Motorola RAZR V3 - How to remove the transceiver board assembly - Step-by-Step (Pictures)

Another in the series of tutorials on how to tear down and repair your Motorola V3 RAZR mobile phone. The guide will cover how to remove the transceiver assembly on your Motorola V3 phone. This guide assumes that you have successfully removed the battery, the SIM card, the backplate, and the antenna from your Motorola V3 mobile phone.

Step-by Step guide for Removing and Replacing the Transceiver Board Assembly:

1. Remove the battery cover, battery, SIM, antenna, rear housing and battery tray as described in the procedures.

2. Lift the transceiver board assembly out of the front housing with the metal tweezers.

3. To replace, insert the transceiver board assembly into the rear housing.

4. Carefully and gently press the transceiver board into position and until it snaps into place.

5. Replace the antenna assembly, rear housing, SIM, battery, and battery cover as described in the procedures.

Guide is compatible with: RAZR V3, RAZR V3c, RAZR V3i, RAZR V3r, RAZR V3t, RAZR V3xx, RAZR V3m

Guide, Manual, Installation, Install, Tutorial, Step-by-Step, How to, Instructions


Randy Johnson said...

Hey Man, This is incredible thanks for breaking it down for a modder who loves breaking it down to replace it for a new housing

Anonymous said...

Is that the entire transeiver assembly? Can I just replace a cooked phone's transeiver and get it to work, or are there more brains elsewhere in the phone?